Welcome to Dezhou Yurun Geosynthetics Co., Ltd. — China source manufacturer of geosynthetic anti-seepage materials. Tel / WhatsApp: +86 13105341718| Chinese
Engineering solution · Material selection & construction

Oxidation Pond Lining

Oxidation ponds and septic tanks hold concentrated organic sewage; odor and seepage are top inspection targets. Thin liners fail under cleaning equipment, sludge removal is hard, and the waterline zone ages fastest under wet-dry cycles.

HomeSolutionsOxidation Pond Lining
Quick Answer

Oxidation Pond Lining: Oxidation ponds use 0.75-1.5mm black HDPE liner (≥1.0mm for concentrated or deep cells), with a 200-300 g/m² cushion, uprated thickness and denser anchoring in the waterline zone. Sequence: de-silt and grade, cushion, bottom-then-slope laying, ≥100mm welded seams, reinforced pipe details, sealed ≥50cm crest trenches and staged filling acceptance. HDPE resists the chemical and biological attack typical of sewage.

Yurun Geosynthetics · Factory Direct

Source manufacturer · Complete material package · Free technical support
Hotline+86 13105341718 (Mr. Yang)
FactoryGeosynthetic Materials Industrial Park, Lingcheng District, Dezhou City, Shandong Province, China
SupplyFull liner package for this scenario
Oxidation pond black liner sealing works
Oxidation pond black liner sealing works

1. Scenario Risks

Oxidation ponds and septic tanks hold concentrated organic sewage; odor and seepage are top inspection targets. Thin liners fail under cleaning equipment, sludge removal is hard, and the waterline zone ages fastest under wet-dry cycles.

2. Material Selection (by location)

LocationRecommended materialReason
Liner0.75-1.5mm black HDPE≥1.0mm for strong/deep cells
Cushion200-300 g/m² geotextile or sandPuncture protection
Waterline zoneOne thickness upWet-dry cycling aging
AnchorageCrest trench + cap beamLevel fluctuation
DetailsBoots with double patchesExtrusion weld + vacuum test

3. Installation Sequence

  1. De-silting & drying
  2. Cushion layer
  3. Bottom then slope laying
  4. Double-seam welding
  5. Detail reinforcement
  6. Seam testing
  7. Anchor trench & cap
  8. Staged filling acceptance

4. Related Products

5. Project References

Oxidation Pond Lining FAQ

FAQ
QThickness selection?

0.75-1.0mm township sewage; 1.0-1.5mm industrial or deep ponds; uprate at the fluctuating waterline.

QAcceptance points?

100% visual seam check with sampled air tests, batch documents verified, details vacuum-tested, filling drawdown within allowance.

Contact Us

CONTACT

Dezhou Yurun Geosynthetics Co., Ltd.

Dezhou Yurun Geosynthetics Co., Ltd. is a source manufacturer of geosynthetic anti-seepage materials, located in the geosynthetic industrial cluster of Lingcheng District, Dezhou City, Shandong Province, China. We supply HDPE geomembrane, pond liners, composite geomembrane, filament and staple geotextile, tunnel waterproof board, composite drainage net, sodium bentonite GCL, ecological bags and cement blanket to projects across China and overseas.

ContactMr. Yang
Tel / WhatsApp+86 13105341718
WeChat13105341718
Websitewww.sdhrttgcl.com
AddressGeosynthetic Materials Industrial Park, Lingcheng District, Dezhou City, Shandong Province, China
ServiceFree selection advice & welding guidance

WeChat / WhatsApp

Scan to add WeChat
Same number: 13105341718

(Placeholder graphic — replace with the real QR image before launch.)

Yurun Geosynthetics · China Source Manufacturer

HDPE geomembrane · pond liner · composite geomembrane · geotextile · GCL · drainage net · geobag · cement blanket · tunnel board

GB/T standards · In stock · Custom sizes · Free technical support · Worldwide delivery

+86 13105341718 (Mr. Yang · WeChat / WhatsApp)

Tel