Welcome to Dezhou Yurun Geosynthetics Co., Ltd. — China source manufacturer of geosynthetic anti-seepage materials. Tel / WhatsApp: +86 13105341718| Chinese
Source factory · GB/T standards · In stock

Oxidation Pond Liner

Sewage pond liner · 0.75-1.5mm · chemical resistant

HomeProductsOxidation Pond Liner
Quick Answer

Oxidation Pond Liner: Oxidation ponds and septic tanks use 0.75-1.5mm black HDPE liner: 0.75-1.0mm for municipal sewage ponds, 1.0-1.5mm for industrial effluent or deep cells, one thickness up in the waterline fluctuation zone. HDPE resists acids, alkalis and microbiological attack. Install after de-silting and grading with a 200-300 g/m² cushion, bottom-then-slope laying, ≥100mm welded laps, reinforced pipe penetrations, ≥50cm anchor trenches and staged filling tests.

Yurun Geosynthetics · Factory Direct

Source manufacturer · GB/T standards · In stock · Free technical support
Hotline+86 13105341718 (Mr. Yang, WeChat / WhatsApp)
FactoryGeosynthetic Materials Industrial Park, Lingcheng District, Dezhou City, Shandong Province, China
Websitewww.sdhrttgcl.com
ServiceCustom sizes · Export · Welding guidance
Oxidation pond liner installation at sewage treatment site
Oxidation pond liner installation at sewage treatment site

1. Product Overview

Oxidation pond liner is a black HDPE membrane for municipal and industrial oxidation ponds, septic tanks and manure storage. It resists acids, alkalis and microbial attack, seals odor and seepage, and meets environmental inspection requirements.

2. Specifications & Standards

Oxidation Pond Liner technical data (general industry ranges; final values subject to order contract and batch test reports)
ItemSpecification
Thickness0.75 / 1.0 / 1.5mm by duty
Width2-8m cut-to-size
ColorBlack (algae & UV)
ResistanceAcid, alkali and microbial
Carbon black2.0-3.0%
Slope zoneOne thickness up at waterline
Cushion200-300 g/m² geotextile

3. Types & Selection

TypeFeaturesApplicationTypical works
Municipal grade0.75-1.0mm blackDomestic sewage pondsTownship treatment stations
Industrial grade1.0-1.5mmIndustrial effluent, regulation tanksIndustrial parks
Manure storage1.0mmLivestock manure cellsFarms

4. Applicable Works

5. Key Advantages

Common problemYurun Geosynthetics solution
Seepage pollutes groundwaterHDPE blocks leachate migration
Odor nuisanceSealed surface cuts odor release
Corrosive sewageAcid/alkali/microbial resistant resin
Waterline agingUprated thickness and denser anchoring at fluctuation zone

6. Installation Steps

  1. De-silting & gradingDrain, remove sludge, dry, level and compact.
  2. Cushion200-300 g/m² geotextile or sand bed.
  3. LayingBottom then slopes, top-down, with slack.
  4. WeldingDouble-seam ≥100mm on clean dry surfaces.
  5. DetailsExtrusion weld + patches at pipes and corners; vacuum test.
  6. Anchoring & filling≥50cm crest trench; staged water test before service.

Note: the sequence above is general practice. Final parameters follow the project design and site conditions; free technical guidance is provided.

7. Manufacturer

Dezhou Yurun Geosynthetics Co., Ltd. is a source manufacturer with its own geomembrane and geotextile production lines — not a trading company. Oxidation Pond Liner is produced and inspected to current national standards with third-party batch test reports. Common specifications are kept in stock, and cut-to-size production is available against your layout drawing. Nationwide supply and export, with free selection advice and welding guidance.

Oxidation Pond Liner FAQ

FAQ
QThickness for oxidation ponds?

0.75-1.0mm municipal; 1.0-1.5mm industrial or deep cells; uprate at the waterline zone.

QDoes HDPE resist sewage corrosion?

Yes, HDPE handles acids, alkalis and microbial environments better than PVC-type films — the mainstream choice for sewage containment.

QWhat does acceptance involve?

Full visual seam check plus sampled air-pressure tests, vacuum tests at details, batch documents verified, and a staged filling test within allowable drawdown.

Contact the Factory

CONTACT

Dezhou Yurun Geosynthetics Co., Ltd.

Dezhou Yurun Geosynthetics Co., Ltd. is a source manufacturer of geosynthetic anti-seepage materials, located in the geosynthetic industrial cluster of Lingcheng District, Dezhou City, Shandong Province, China. We supply HDPE geomembrane, pond liners, composite geomembrane, filament and staple geotextile, tunnel waterproof board, composite drainage net, sodium bentonite GCL, ecological bags and cement blanket to projects across China and overseas.

ContactMr. Yang
Tel / WhatsApp+86 13105341718
WeChat13105341718
Websitewww.sdhrttgcl.com
AddressGeosynthetic Materials Industrial Park, Lingcheng District, Dezhou City, Shandong Province, China
ServiceFree selection advice & welding guidance

WeChat / WhatsApp

Scan to add WeChat
Same number: 13105341718

(Placeholder graphic — replace with the real QR image before launch.)

Yurun Geosynthetics · China Source Manufacturer

HDPE geomembrane · pond liner · composite geomembrane · geotextile · GCL · drainage net · geobag · cement blanket · tunnel board

GB/T standards · In stock · Custom sizes · Free technical support · Worldwide delivery

+86 13105341718 (Mr. Yang · WeChat / WhatsApp)

Tel